Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY

PROPELLER SHAFT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE CENTER EXHAUST PIPE ASSEMBLY
(Click here)


2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    C256683E01
  1. Place matchmarks on the differential companion flange and flexible coupling.
    Text in Illustration 
    *a
    Matchmark

  1. Remove the 4 nuts, 4 bolts and 4 washers.



    C256682
  1. Remove the 2 bolts.

  1. Disconnect the center support bearing.

  1. Remove the front propeller shaft with the center bearing assembly.



    C262073E01
  1. Insert SST in the transmission to prevent oil leaks. (for Manual Transmission)

    NOTICE:
    Be careful not to damage the oil seal.

    SST
    09325-20010  



    C261042E01
  1. Insert SST in the transmission to prevent oil leaks. (for Automatic Transmission)

    NOTICE:
    Be careful not to damage the oil seal.

    SST
    09325-40010