Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B1408    Meter EEPROM Circuit

for Preparation Click here


DESCRIPTION

The main body ECU (network gateway ECU) stores this code when an internal malfunction is detected in the combination meter assembly.

DTC Code
DTC Detection Condition
Trouble Area
B1408
Internal malfunction in the combination meter assembly.
Combination meter assembly

INSPECTION PROCEDURE

NOTICE:
If the combination meter assembly is replaced, refer to Service Bulletin.

1.REGISTER RECOGNITION CODES
  1. Register the recognition codes (Refer to Service Bulletin).


NEXT


2.CHECK FOR DTC
  1. Check for DTCs (Click here).

    OK:
    DTC B1408 is not output.



NG
REPLACE COMBINATION METER ASSEMBLY (Click here)
OK

END