Home › Engine / Hybrid System › FA20 FUEL › FUEL PRESSURE SENSOR

FUEL PRESSURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE INTAKE MANIFOLD
(Click here)


2. REMOVE NO. 2 ENGINE HANGER


A279574
  1. Remove the 2 bolts and No. 2 engine hanger from the cylinder block (for bank 1).



3. REMOVE FUEL PRESSURE SENSOR


    A278494
  1. Disconnect the fuel pressure sensor connector.



    A282918E01
  1. Using SST, remove the fuel pressure sensor from No. 1 fuel delivery pipe sub-assembly RH.

    SST
    09922-10010