AUTOMATIC TRANSMISSION SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
![]() |
| NORMAL MODE AND CHECK MODE |
| 2 TRIP DETECTION LOGIC |
| FREEZE FRAME DATA |
| DLC3 (Data Link Connector 3) |
Check the DLC3 (Click here).
| BATTERY VOLTAGE |
| MIL (Malfunction Indicator Lamp) |
The MIL illuminates when the ignition switch is first turned on (the engine is not running).
The MIL should turn off when the engine is started. If the MIL remains illuminated, the diagnosis system has detected a malfunction or abnormality in the system.