Home › Power Source / Network › FA20 BATTERY / CHARGING › GENERATOR

GENERATOR > INSTALLATION

for Preparation Click here



1. INSTALL GENERATOR ASSEMBLY
  1. Install the generator with the 2 bolts.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }

  1. Connect the generator connector.

  1. Connect the generator wire with the nut.

    Torque:
    16 N*m{ 163 kgf*cm , 12 ft.*lbf }

  1. Install the terminal cap.



2. INSTALL FAN AND GENERATOR V BELT
(Click here)


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.0 N*m{ 61 kgf*cm , 53 in.*lbf }