Home › Power Source / Network › FA20 BATTERY / CHARGING › GENERATOR

GENERATOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
The power window system utilizes a mechanism in which the door glass moves down slightly when the door is opened, and in which the glass moves up when the door closed in order to prevent the door molding from being damaged. When the negative (-) battery terminal needs to be disconnected for servicing, fully open the driver and passenger door glasses in advance.



2. REMOVE FAN AND GENERATOR V BELT
(Click here)


3. REMOVE GENERATOR ASSEMBLY


    A277199E01
  1. Remove the terminal cap.
    Text in Illustration 
    *1
    terminal cap

  1. Remove the nut and disconnect the generator wire.



    A277200
  1. Disconnect the generator connector.



    A277201
  1. Remove the 2 bolts and generator assembly.