BODY > GENERAL MAINTENANCE |
| 1. BODY INSPECTION |
Check the body exterior for dents, scratches and rust.
Check the underbody for rust and damage.
If necessary, replace the damaged part or repair the damaged area.
| 2. INSPECT TIRE AND INFLATION PRESSURE |
Check the tires for wear and proper inflation pressure (Click here).
| 3. INSPECT LIGHTS, HORN, WIPERS AND WASHERS |
| 4. REPLACE AIR CONDITIONING FILTER |
Remove the air conditioning filter .
Visually inspect the surface of the air conditioning filter.
If the air conditioning filter is contaminated with foreign matter, replace it.
| 5. INSPECT REFRIGERANT AMOUNT FOR AIR CONDITIONER |
Check the sight glass on the liquid tube.
| Type | See procedures |
| HFC-134a (R134a) |
Click here
|
| HFO-1234yf (R1234yf) |
Click here
|
| 6. ROAD TEST |
Check the engine and chassis for abnormal noises.
Check that the vehicle does not wander or pull to one side.
Check that the brakes work properly and do not drag.
Set the parking brake shoes and drums.
| 7. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY |
If necessary, tighten the bolts and nuts on the chassis parts listed below.
If necessary, tighten the bolts and nuts on the body parts listed below.
| 8. FINAL INSPECTION |
Check the operation of the body parts.
Hood
Front doors
Luggage compartment door
Seats
Be sure to deliver a clean car. Make sure to check the following: