LUGGAGE COMPARTMENT DOOR > REASSEMBLY |
| 1. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY (for LH Side) |
When reusing the luggage compartment door support assembly:
![]() |
Install the 2 stop rings to the luggage compartment door support assembly.
![]() |
Install the luggage compartment door support assembly.
| 2. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY (for RH Side) |
| 3. INSTALL LICENSE PLATE LIGHT ASSEMBLY |
Engage the 2 claws to install the license plate light assembly.
Connect the connector.
| 4. INSTALL RADIATOR GRILLE EMBLEM (for Rear Side) |
Clean the attachment surface.
Using an infrared light, heat the double-sided adhesive tape remaining on the luggage compartment door panel.
| Item | Temperature |
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
Using a piece of cloth, rub the remaining double-sided tape off the luggage compartment door panel while it is hot from the infrared light.
Using a non-residue solvent, clean the attachment surface.
Using an infrared light, heat the radiator grille emblem installation surface of the luggage compartment door panel and new radiator grille emblem.
| Item | Temperature |
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
| Radiator Grille Emblem | 20 to 30°C (68 to 86°F) |
![]() |
Insert the 2 pins into the luggage compartment door panel and install a new radiator grille emblem.
| *1 | Location Pin |
| 5. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY |
Engage the 2 claws and install the back door opener switch assembly.
| 6. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Engage the clip to install the 3 screws and the luggage compartment door outside garnish sub-assembly.
Connect the 2 license plate light connectors.
Connect the back door opener switch assembly connector.
| 7. INSTALL LUGGAGE CLOSER CABLE ASSEMBLY (w/ Lock Cylinder) |
Engage the clamp to install the luggage compartment door lock cable.
| 8. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY |
Install the luggage compartment door lock assembly with the 2 bolts.
Connect the luggage compartment door lock cable to the luggage compartment door lock assembly.
Engage the claw to close the cover.
Connect the connector.
| 9. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER PACKING (w/ Lock Cylinder) |
Install the new luggage compartment door lock cylinder packing.
| 10. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder) |
Connect the luggage compartment door lock cable to the luggage compartment door lock cylinder assembly.
Install the luggage compartment door lock cylinder assembly with the 2 nuts.
| 11. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION |
![]() |
Engage the 2 claws and install the 2 new luggage compartment door cushions.
| 12. INSTALL REAR SPOILER (except Sport Package) |
| 13. INSTALL REAR SPOILER (for Sport Package) |
| 14. INSTALL LUGGAGE COMPARTMENT DOOR COVER (w/ Entry and Start System) |
![]() |
Install the luggage compartment door cover with the 7 clips.