Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR

HEADLIGHT CLEANER ACTUATOR > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE FRONT BUMPER COVER
(Click here)


2. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


    E250582E01
  1. Disconnect the headlight washer hose as shown in the illustration.
    Text in Illustration 
    *a
    Push



    E250581
  1. Remove the clip.

  1. Remove the bolt and the headlight washer actuator sub-assembly.