Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR

HEADLIGHT CLEANER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER
(Click here)


2. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    E250577E01
  1. Loosen the clip and disconnect the headlight cleaner hose from the headlight cleaner motor and pump assembly, as shown in the illustration.
    Text in Illustration 
    *1
    Clip



    E250580
  1. Disconnect the connector.



    E250578
  1. Remove the bolt and the headlight cleaner motor and pump assembly.