Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
  1. Install the front No. 1 speaker assembly with the 3 screws.

    NOTICE:
    Do not touch the speaker cone.

  1. Connect the connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    B313122E01
  1. Connect the front door lock remote control cable assembly and front door inside locking cable assembly to the front door inside handle.
    Text in Illustration 
    *1
    Front Door Inside Locking Cable Assembly
    *2
    Front Door Lock Remote Control Cable Assembly

  1. Connect each connector.



    B314824
  1. Engage the 10 clips and install the front door trim board sub-assembly.



    B313120
  1. Engage the clip and install the 3 screws.



    B314825
  1. Engage the claw and install the cap.



3. INSTALL DOOR ARMREST COVER


    B314960
  1. Engage the guide and 7 claws, and install the door armrest cover.



4. INITIALIZE POWER WINDOW CONTROL SYSTEM
(Click here)


5. INSPECT INSPECT POWER WINDOW OPERATION
(Click here)