AMPLIFIER ANTENNA > REMOVAL |
| 1. REMOVE ROOF HEADLINING ASSEMBLY |
| 2. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY |
![]() |
Turn the roof antenna pole sub-assembly in the direction indicated by the arrow in the illustration to remove it.
| 3. REMOVE AMPLIFIER ANTENNA ASSEMBLY |
![]() |
Disconnect the connector.
![]() |
Remove the nut.
![]() |
Disengage the 2 claws and remove the amplifier antenna assembly.
| 4. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY |
![]() |
Disengage the 3 clamps and remove the No. 3 antenna cord sub-assembly.