Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B1406    SCU EEPROM NG

for Preparation Click here


DESCRIPTION

The main body ECU (network gateway ECU) stores this code when an internal malfunction is detected in the transponder key ECU assembly or when the ROM in the transponder key ECU assembly cannot be accessed.

DTC Code
DTC Detection Condition
Trouble Area
B1406
Internal malfunction in the transponder key ECU assembly when the ROM in the transponder key ECU assembly cannot be accessed.
Transponder key ECU assembly

INSPECTION PROCEDURE

NOTICE:
If the transponder key ECU assembly is replaced, refer to Service Bulletin.

1.REGISTER RECOGNITION CODES
  1. Register the recognition codes (Refer to Service Bulletin).


NEXT


2.CHECK FOR DTC
  1. Check for DTCs (Click here).

    OK:
    DTC B1406 is not output.



NG
REPLACE TRANSPONDER KEY ECU ASSEMBLY
OK

END