Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR

OCCUPANT DETECTION SENSOR > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the front passenger side of RHD and LHD vehicles.
  2. The procedures listed below are for the front passenger side of an LHD vehicle.



1. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:
Use the same procedure as for the driver seat (Click here).



2. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)


    B279522
  1. Remove the 2 hog rings.



    B299980
  1. Remove the 12 hog rings and the separate type front seat cushion pad from the separate type front seat cushion cover.