RADIO ANTENNA CORD > INSTALLATION |
| 1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY |
Align the locating tape of the No. 2 antenna cord sub-assembly as shown in the illustration, and then engage the 2 clamps.

| *1 | No. 2 Antenna Cord Sub-assembly | *2 | Marking Line |
| *a | End of Roof Headlining Assembly | - | - |
![]() | Adhesive Tape | ![]() | Locating Tape |
Fix the No. 2 antenna cord sub-assembly on the roof headlining assembly with adhesive tape as shown in the illustration.
| 2. INSTALL ROOF HEADLINING ASSEMBLY |
| 3. INSTALL ANTENNA CORD SUB-ASSEMBLY |
Engage the 10 clamps and install the antenna cord sub-assembly.
Connect the connector.
Install the floor mat.
| 4. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY (for Automatic Air Conditioning System) |
| 5. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY (for Manual Air Conditioning System) |
| 6. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY (w/o Air Conditioning System) |