Home › Power Source / Network › POWER DISTRIBUTION › ELECTRIC POWER CONTROL SYSTEM

DTC    B1010    BIU System Error

for Preparation Click here


DESCRIPTION

  1. B1010 is stored when there is an internal malfunction in the Main body ECU (network gateway ECU).

DTC No.
DTC Detection Condition
Trouble Area
B1010
Main body ECU (network gateway ECU) internal error
  1. Main body ECU (network gateway ECU)

INSPECTION PROCEDURE

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.CHECK FOR DTC
  1. Check for DTCs (Click here).
    Result 
    Result
    Proceed to
    DTC B1010 is output
    A
    DTC is not output
    B



B
USE SIMULATION METHOD TO CHECK (Click here)
A

REPLACE MAIN BODY ECU (NETWORK GATEWAY ECU) (Click here)