TIRE PRESSURE WARNING RECEIVER > INSTALLATION |
| 1. INSTALL TIRE PRESSURE WARNING RECEIVER |
Engage the guide and install the tire pressure warning receiver.
Install the bolt.
Connect the connector.
| 2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY |
Engage the 4 clips and install the package tray trim panel assembly with the center stop light assembly.
Install the 4 clips.
Connect the connector.
| 3. INSTALL REAR WINDOW SIDE GARNISH LH |
Engage the guide and 2 clips.
Install the rear window side garnish LH with the bolt.
| 4. INSTALL REAR WINDOW SIDE GARNISH RH |
| 5. INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH |
Install the 2 lid cover clips from the quarter trim lid sub-assembly LH.
![]() |
Engage the 2 guides and 6 claws and install the quarter trim lid sub-assembly LH.
| *1 | Lid Cover Clip |
| 6. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH |
| 7. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH |
Engage the 8 clips install the quarter trim panel assembly LH.
Install the clip.
| 8. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH |
| 9. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER LH |
Fold down the rear seatback assembly.
Engage the 2 clips install the luggage compartment inner trim cover LH.
| 10. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER RH |
| 11. INSTALL FRONT DOOR SCUFF PLATE LH |
Engage the 6 claws install the front door scuff plate LH.
| 12. INSTALL FRONT DOOR SCUFF PLATE RH |
| 13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
![]() |
Align the alignment mark on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.
| *a | Alignment Mark |
| 14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
| 15. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH |
Engage the hook and install the separate type rear seat cushion assembly LH.
Install the bolt.
| 16. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH |
| 17. INSPECT TIRE PRESSURE WARNING SYSTEM |