Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B1407    M Communication Circuit

for Preparation Click here


DESCRIPTION

The main body ECU (network gateway ECU) stores this code if a communication problem is detected between the main body ECU (network gateway ECU) and the combination meter assembly.

DTC Code
DTC Detection Condition
Trouble Area
B1407
When there is a problem in communication between the main body ECU (network gateway ECU) and the combination meter assembly.
Combination meter assembly

INSPECTION PROCEDURE

NOTICE:
If the combination meter assembly is replaced, refer to Service Bulletin.

1.CHECK FOR DTC
  1. Check for DTCs (Click here).

Result 
Result
Proceed to
Other than DTC B1407 are not output
A
Other than DTC B1407 are output
B


B
GO TO DTC CHART (Click here)
A

REPLACE COMBINATION METER ASSEMBLY (Click here)