Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B1576    Key Write Malfunction to EFI ECU

for Preparation Click here


DESCRIPTION

The ECM stores this code when an internal malfunction is detected in the ECM, or when the ROM in the ECM cannot be accessed when registering a key.

DTC Code
DTC Detection Condition
Trouble Area
B1576
  1. Internal malfunction in the ECM.
  2. When the ROM in the ECM cannot be accessed when registering a key.
ECM

INSPECTION PROCEDURE

NOTICE:
If the ECM is replaced, refer to Service Bulletin.

1.REGISTER ECU COMMUNICATION ID
  1. Register the ECU communication ID (Refer to Service Bulletin).

OK:
The ECU communication ID can be registered



NG
Go to step 2
OK

END 

2.REGISTER ECU COMMUNICATION ID
  1. Register the ECU communication ID (Refer to Service Bulletin).

OK:
The ECU communication ID can be registered



NG
Go to step 3
OK

END 

3.REGISTER ECU COMMUNICATION ID
  1. Register the ECU communication ID (Refer to Service Bulletin).

OK:
The ECU communication ID can be registered



NG
REPLACE ECM (Click here)
OK

END