Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B1577    Immobiliser System EEPROM Malfunction

for Preparation Click here


DESCRIPTION

The ECM stores this code when an internal malfunction is detected in the main body ECU (network gateway ECU) or when the ROM in the main body ECU (network gateway ECU) cannot be accessed.

DTC Code
DTC Detection Condition
Trouble Area
B1577
  1. Internal malfunction in the main body ECU (network gateway ECU).
  2. When the ROM in the main body ECU (network gateway ECU) cannot be accessed.
Main body ECU (network gateway ECU)

INSPECTION PROCEDURE

NOTICE:
If the main body ECU (network gateway ECU) is replaced, refer to Service Bulletin.

1.REGISTER ECU COMMUNICATION ID
  1. Register the ECU communication ID (Refer to Service Bulletin).

OK:
The ECU communication ID can be registered



NG
Go to step 2
OK

END 

2.REGISTER ECU COMMUNICATION ID
  1. Register the ECU communication ID (Refer to Service Bulletin).

OK:
The ECU communication ID can be registered



NG
Go to step 3
OK

END 

3.REGISTER ECU COMMUNICATION ID
  1. Register the ECU communication ID (Refer to Service Bulletin).

OK:
The ECU communication ID can be registered



NG
REPLACE MAIN BODY ECU (NETWORK GATEWAY ECU) (Click here)
OK

END