Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER

CONDENSER > REMOVAL

for Preparation Click here



1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
  1. for HFC-134a (R134a):

  1. for HFO-1234yf (R1234yf):



2. REMOVE FRONT BUMPER COVER
(Click here)


3. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    E246367
  1. Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the condenser.

  1. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



4. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY


    E246368
  1. Remove the bolt and disconnect the air conditioning tube and accessory assembly from the condenser.

  1. Remove the O-ring from the air conditioning tube and accessory assembly.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



5. REMOVE COOLER CONDENSER ASSEMBLY


    E246369
  1. Disconnect the connector.

  1. Remove the 4 bolts and the cooler condenser assembly.