AIR CONDITIONING PANEL (for Manual Air Conditioning System) > INSTALLATION |
| 1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
After aligning with the cables, engage the 2 claws and connect the heater control cable sub-assembly. (for RH side).
After aligning with the cables, engage the 2 claws and connect the heater control cable sub-assembly. (for LH side).
Connect each connector.
Engage the 6 claws.
Install the air conditioning control assembly with the 2 screws.
| 2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 6 claws.
Install the No. 2 instrument cluster finish panel garnish with the screw.
| 3. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
| 4. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel) |
Engage the 8 clips and 2 claws to install the instrument panel ornament.
| 5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel) |
Engage the 3 clips and 3 claws to install the center instrument cluster finish panel sub-assembly.
| 6. INSTALL CONSOLE BOX ASSEMBLY |