Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (for Automatic Air Conditioning System)

AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B315188E01
  1. Using a moulding remover, disengage the 2 claws and 4 clips to remove the center instrument cluster finish panel sub-assembly.
    Text in Illustration 
    *1
    Moulding Remover



3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B313970
  1. Remove the screw.

  1. Disengage the 6 claws to remove the No. 2 instrument cluster finish panel garnish.



4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

HINT:
Use the same procedure as for the No. 2 instrument cluster finish panel garnish.



5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    E246389
  1. Remove the 2 screws.

  1. Disengage the 6 claws.



    E246465
  1. Disconnect each connector and remove the air conditioning control assembly.