AIR CONDITIONING PANEL (for Manual Air Conditioning System) > REMOVAL |
| 1. REMOVE CONSOLE BOX ASSEMBLY |
| 2. REMOVE INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel) |
![]() |
Using a moulding remover, disengage the 8 clips and 2 claws to remove the instrument panel ornament.
| *1 | Moulding Remover |
| 3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel) |
![]() |
Using a moulding remover, disengage the 2 claws and 4 clips to remove the center instrument cluster finish panel sub-assembly.
| *1 | Moulding Remover |
| 4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() |
Remove the screw.
Disengage the 6 claws to remove the No. 2 instrument cluster finish panel garnish.
| 5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
| 6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY |
![]() |
Remove the 2 screws and disengage the 6 claws.
![]() |
Disconnect each connector and air conditioning control assembly.
![]() |
Disengage the 2 claws and the cable assembly (for RH side).
![]() |
Disengage the 2 claws and the cable assembly (for LH side) and remove the air conditioning control assembly.