Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER

FRONT SEATBACK HEATER > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B299961E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
    Text in Illustration 
    *1
    Protective Tape



3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    B299962
  1. Remove the screw and vertical adjusting handle.



4. REMOVE SEAT ADJUSTER COVER CAP


    B348034E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws to remove the seat adjuster cover cap.
    Text in Illustration 
    *1
    Protective Tape



5. REMOVE FRONT SEAT CUSHION SHIELD


    B311900
  1. Remove the 2 screws.

  1. Disengage the 4 claws, 5 guides and clip to remove the front seat cushion shield.



6. REMOVE FRONT SEAT INNER CUSHION SHIELD


    B299964
  1. Disengage the 2 claws and 4 guides to remove the front seat inner cushion shield.



7. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    B299970
  1. Disengage the 2 hooks.



    B299965
  1. Disconnect the rubber band of the separate type front seatback cover.



    B281106
  1. Disconnect the front seat heater connector and disengage the clamp. (w/ Seat Heater System)



    B280208
  1. Disengage the fastener and separate the front seat airbag assembly wire harness.



    B311905
  1. Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.



    B348038
  1. Remove the washer (for Fold Down Seat Type).



    B311908
  1. Using a T40 "TORX" socket wrench, remove the 4 bolts, separate type front seatback assembly and No. 2 front seat travel link.



8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    B299972
  1. Remove the 5 hog rings.



    B299973
  1. Open the 2 fasteners.

  1. Turn back the separate type front seatback cover.



    B348039
  1. Remove the 2 hog rings.



    B299974
  1. Disengage the 2 hooks.



    B299977
  1. Remove the nut and the 3 brackets.



    B299975
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.

  1. Remove the separate type front seatback cover with pad from separate type front seatback spring assembly.



9. REMOVE SEPARATE TYPE FRONT SEATBACK PAD (FRONT SEATBACK HEATER ASSEMBLY)


    B299976
  1. Remove the 14 hog rings and separate type front seatback pad from the separate type front seatback cover.