REAR FLOOR AIRBAG SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE CONSOLE BOX ASSEMBLY |
| 4. REMOVE NO. 2 AIRBAG SENSOR ASSEMBLY |
Check that the ignition switch is off.
Check that the cable is disconnected from the negative (-) battery terminal.
![]() |
Remove the bolt.
| *1 | Outer Housing |
Slide the outer housing to release the lock, and then disconnect the connector to remove the No. 2 airbag sensor assembly.