Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
(Click here)


2. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    B312240
  1. Disconnect the connector.

  1. Disengage the 2 claws to remove the license plate light assembly.

    HINT:
    Use the same procedure as for the other side.



3. REMOVE LICENSE PLATE LIGHT BULB


    B312241
  1. Turn the license plate light socket and wire with the license plate light bulb in the direction indicated by the arrow shown in the illustration to remove them as a unit.

  1. Remove the license plate light bulb from the license plate light socket and wire.

    HINT:
    Use the same procedure as for the other side.