Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL REAR BUMPER PLATE LH
  1. Engage the 2 guides and 4 claws to install the rear bumper plate LH.



2. INSTALL REAR BUMPER PLATE RH

HINT:
Use the same procedure for the RH and LH sides.



3. INSTALL CENTER REAR BUMPER BRACKET


    B313047
  1. Install the center rear bumper bracket with the clip.

    HINT:
    Use the same procedure for the RH and LH sides.



4. INSTALL REAR BUMPER REINFORCEMENT


    B313046
  1. Install the rear bumper reinforcement with the 4 bolts and the 2 nuts.

    Torque:
    45 N*m{ 459 kgf*cm , 33 ft.*lbf }



5. INSTALL REAR BUMPER SIDE BRACKET LH


    B457916
  1. Install the rear bumper side bracket LH with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



6. INSTALL REAR BUMPER SIDE BRACKET RH

HINT:
Use the same procedure for the RH and LH sides.



7. INSTALL REAR BUMPER SIDE RETAINER LH


    B313044
  1. Install the rear bumper side retainer LH with the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



8. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure for the RH and LH sides.



9. INSTALL REAR BUMPER SIDE SEAL LH


    B313043
  1. Install the rear bumper side seal LH with the 4 clips.



10. INSTALL REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure for the RH and LH sides.



11. INSTALL REAR LIGHT ASSEMBLY
  1. Engage the claw to install the rear light assembly.

  1. Install the 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Install the 2 clips.