CANISTER > INSTALLATION |
| 1. INSTALL CHARCOAL CANISTER ASSEMBLY (for Metal Type) |
Install the canister base bracket to the charcoal canister assembly with 2 nuts.
Install the charcoal canister assembly with canister base bracket with the 2 bolts and the nut.
![]() |
Connect the drain hose D as indicated by the arrows, in the order shown in the illustration.
![]() |
Connect the drain hose C as shown in the illustration.
| 2. INSTALL CANISTER PUMP MODULE (for Metal Type) |
Install the drain hose E.
Connect the drain hose A and the drain hose B.
Engage the clamp.
Install the nuts and bracket B.
Install the 2 nuts and bracket A.
Engage the clip.
Install the check valve with 3 bolts.
Connect the evaporation hose to the fuel pipe assembly.
Engage the clip.
Connect the drain hose A to the fuel filler pipe.
Connect the drain hose B to the charcoal canister assembly.
| 3. INSTALL CHARCOAL CANISTER ASSEMBLY (for Clamp Type) |
Install the canister bracket A and canister bracket B to the charcoal canister assembly with 3 nuts.
Install the charcoal canister assembly with 2 bolts and nut.
Connect the purge tube.
Connect the drain hose and drain tube.
| 4. INSTALL FUEL OUTLET VALVE ASSEMBLY (for Clamp Type) |
Install the fuel outlet valve assembly to the canister bracket A.
Connect the 2 evaporation hoses and drain hose to the fuel outlet valve assembly.
| 5. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY |
| 6. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY |