Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY

FOG LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT BUMPER COVER
(Click here)


2. REMOVE FOG LIGHT ASSEMBLY


    B312209
  1. Disconnect the connector.

  1. Remove the 2 screws.



    B312210
  1. Disengage the 2 guides and remove the fog light assembly.