Home › Vehicle Exterior › LIGHTING (EXT) › DAYTIME RUNNING LIGHT ASSEMBLY

DAYTIME RUNNING LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT BUMPER COVER
(Click here)


2. REMOVE DAYTIME RUNNING LIGHT ASSEMBLY


    B313016
  1. Disconnect the connector.

  1. Remove the 2 screws.



    B313017
  1. Disengage the 2 guides and remove the daytime running light assembly.