Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

DTC    U0073    Control Module Communication Bus "A" Off

DTC    U0100    Lost Communication with ECM / PCM "A"

DTC    U0122    Lost Communication with Vehicle Dynamics Control Module

DTC    U0131    Lost Communication with Power Steering Control Module

DTC    U0140    Lost Communication with Body Control Module

DTC    U0151    Lost Communication with Restraints Control Module

for Preparation Click here


DESCRIPTION

The combination meter communicates with the ECM, skid control ECU (brake actuator assembly), power steering ECU assembly, main body ECU (network gateway ECU) and airbag sensor assembly via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0073
Lost Communication with Each ECU
CAN communication system
U0100
ECM communication error
  1. CAN communication system
  2. ECM
U0122
Skid control ECU (brake actuator assembly) communication error
  1. CAN communication system
  2. Skid control ECU (brake actuator assembly)
U0131
Power steering ECU assembly communication error
  1. CAN communication system
  2. Power steering ECU assembly
U0140
Main body ECU (network gateway ECU) communication error
  1. CAN communication system
  2. Main body ECU (network gateway ECU)
U0151
Airbag sensor assembly communication error
  1. CAN communication system
  2. Airbag sensor assembly

INSPECTION PROCEDURE

1.CONFIRM DTC OUTPUT
  1. Check DTC (Click here).
    Result
    Proceed to
    CAN communication DTC is not output
    A
    CAN communication DTC is output
    B



B
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)