Home › Engine / Hybrid System › FA20 STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
  1. Install the 2 screws, and install the ignition or starter switch.

  1. Connect the connector.



2. INSTALL UPPER STEERING COLUMN COVER
  1. Engage the 2 claws to install the upper steering column cover.



3. INSTALL LOWER STEERING COLUMN COVER
  1. w/ Knee Airbag

    1. Engage the 4 claws to install the lower steering column cover.

    2. Install the 2 screws.

  1. w/o Knee Airbag

    1. Engage the 6 claws to install the lower steering column cover.

    2. Install the 2 screws.



4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)
(Click here)


5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
  1. Connect each connector.



    B312545E01
  1. for Automatic Air Conditioning System for RHD:

    1. Connect the connector.

    2. Engage the guide and connect the aspirator hose.
      Text in Illustration 
      *1
      Aspirator Hose

  1. Engage the 4 claws.

  1. Engage the 4 clips to install the No. 1 instrument panel under cover sub-assembly.

  1. Install the 2 screws.



6. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT
  1. Connect the connector.

  1. Engage the 2 claws that are holding the upper instrument panel meter ornament and steering column cover together.

  1. Engage the 2 clips and 6 claws.



7. INSTALL METER HOOD SUB-ASSEMBLY
  1. Engage the 12 claws.

  1. Install the meter hood sub-assembly with the screw.



8. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
  1. Engage the 8 clips and 2 claws to install the instrument panel ornament.



9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
  1. Engage the 3 clips and 3 claws to install the center instrument cluster finish panel sub-assembly.



10. INSTALL INSTRUMENT SIDE PANEL LH

HINT:
Use the same procedure as for the RH side.