CENTER AIRBAG SENSOR ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System) |
| 4. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System) |
| 5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/o Air Conditioning System) |
| 6. REMOVE AIRBAG SENSOR ASSEMBLY |
Check that the ignition switch is off.
Check that the cable is disconnected from the negative (-) battery terminal.
![]() |
Disconnect the connectors from the airbag sensor assembly as shown in the illustration.
Remove the bolt, 2 nuts and airbag sensor assembly.