Home › Engine / Hybrid System › FA20 COOLING › WATER PUMP

WATER PUMP > ON-VEHICLE INSPECTION

for Preparation Click here



1. REMOVE WATER PUMP PULLEY
(Click here)


2. INSPECT ENGINE WATER PUMP ASSEMBLY
  1. Turn the pulley and check that the water pump bearing moves smoothly and quietly. If necessary, replace the engine water pump assembly.
    If necessary, replace the engine water pump assembly.



    A282924E01
  1. Visually check the air hole and water hole for coolant leaks.
    Text in Illustration 
    *1
    Air Hole
    *2
    Water Hole
    If necessary, replace the engine water pump assembly.



3. INSTALL WATER PUMP PULLEY
(Click here)