HORN > REMOVAL |
| 1. REMOVE FRONT BUMPER COVER |
| 2. REMOVE HIGH PITCHED HORN ASSEMBLY (except CHINA) |
![]() |
Disconnect the connector.
Remove the bolt, and the high pitched horn assembly with horn bracket sub-assembly.
| 3. REMOVE LOW PITCHED HORN ASSEMBLY (for CHINA) |
![]() |
Disconnect the connector.
Remove the bolt, and the low pitched horn assembly with horn bracket sub-assembly.
| 4. REMOVE HORN BRACKET SUB-ASSEMBLY |
![]() |
Remove the bolt and nut, and the horn bracket sub-assembly.
| 5. REMOVE LOW PITCHED HORN ASSEMBLY (except CHINA) |
![]() |
Disconnect the connector.
Remove the bolt and low pitched horn assembly.
| 6. REMOVE HIGH PITCHED HORN ASSEMBLY (for CHINA) |
![]() |
Disconnect the connector.
Remove the bolt and high pitched horn assembly.