Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    B299964
  1. Disengage the 2 claws and 4 guides to remove the front seat inner cushion shield.



3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    B299965
  1. Disconnect the rubber band of the separate type front seatback cover.



    B299966
  1. Disengage the claw and each clamp under the front seat assembly.



    B299967
  1. Disengage each clamp.

  1. Remove the nut, washer and front seat inner belt assembly.



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
  1. Disconnect the occupant classification sensor connector.



    B311976
  1. Disengage the claw and each clamp under the front seat assembly.



      B311399
    1. Remove the nut, washer and front seat inner belt assembly.