Home › Vehicle Exterior › BODY PANEL › FRONT BODY PILLAR LOWER GUSSET
BM2090E _01 Vehicle Exterior _060720 BODY PANEL _0297849 FRONT BODY PILLAR LOWER GUSSET F

BODY PANEL  FRONT BODY PILLAR LOWER GUSSET  ASSEMBLY REPLACEMENT  


K105348

With the cowl top to apron brace removed.


REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disk Sander etc.


K139727

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K139728E01
2.385,2.792 3.917,2.292 3.917,2.292 4.104,2.292 false 4.167,2.198 5.823,2.448 1.656,0.25 10 false COWL TOP SIDE PANEL 1.573,6.802 1.885,7 0.313,0.198 10 false *1