Home › Vehicle Exterior › BODY PANEL › ROOF PANEL › from 2016.06
BM2090E _01 Vehicle Exterior _060720 BODY PANEL _0297860 ROOF PANEL F

BODY PANEL  ROOF PANEL  ASSEMBLY REPLACEMENT  


K105117

REMOVAL


Symbol meaning
K108818

Remove Weld Points


U147389E02
1.615,3.875 1.719,4.031 0.104,0.156 10 false 3 1.542,4.375 1.646,4.531 0.104,0.156 10 false 6 1.479,4.885 1.583,5.042 0.104,0.156 10 false 2 1.531,5.385 1.635,5.542 0.104,0.156 10 false 6 1.615,5.875 1.719,6.031 0.104,0.156 10 false 3 5.448,4.917 5.625,5.073 0.177,0.156 10 false 15 3.469,3.125 3.646,3.281 0.177,0.156 10 false 13 3.458,6.646 3.635,6.802 0.177,0.156 10 false 13

INSTALLATION


Symbol meaning
K108821

Spot Weld
K108823

Plug Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Before temporarily installing the new parts, apply body sealer to the windshield header panel and roof panel reinforcement.

HINT:

Apply just enough body sealer for the new parts to make contact.


4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K137322

K139771E01
4.427,7.094 4.292,7.094 4.292,7.094 4.104,6.01 false 4.5,7 5.469,7.25 0.969,0.25 10 false ROOF PANEL