Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT
BM2090E _01 Vehicle Exterior _060721 BODY DIMENSIONS _0297866 ENGINE COMPARTMENT F

BODY DIMENSIONS  ENGINE COMPARTMENT  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Point E, e on the vehicle are asymmetrical.

·

In cases in which only one dimension is given, left and right are symmetrical.


·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Fender Extension Installation nut M6 (0.24)
B, b Front Spring Support Installation Hole φ9.5 (0.37)
C, c Hood Hinge Installation Nut M8 (0.31)
D Cowl Panel Installation Hole φ7 (0.28)
E, e Earth Installation Nut M6 (0.24)
F, f Front Side Member Standard Hole φ14 (0.55)
G, g Radiator Support Upper Installation Nut M8 (0.31)
H, h Front Bumper Reinforcement Installation Nut M8 (0.31)
J, j Hood Lock Support Installation Nut M6 (0.24)
K, k Fender Apron Bracket Standard Hole φ8 (0.31)
L, l Radiator Support Upper Installation Nut M8 (0.31)
M, m Front Fender Extension Installation nut M6 (0.24)
N, n Front Fender Extension Installation nut M6 (0.24)
O, o Headlight Installation Nut M6 (0.24)

K139437E01
0.427,6.292 3.406,6.521 2.979,0.229 10 false Distance between points other than those above 4.688,6.292 6.802,6.51 2.115,0.219 10 false Height from Imaginary Datum Line 0.073,8.469 0.385,8.667 0.313,0.198 10 false mm 0.083,8.615 0.375,8.865 0.292,0.25 10 false (in.)