Home › Vehicle Exterior › BODY DIMENSIONS › FRONT DOOR
BM2090E _01 Vehicle Exterior _060721 BODY DIMENSIONS _0297867 FRONT DOOR F

BODY DIMENSIONS  FRONT DOOR  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Use specification P when performing centering measurements for the body dimensions.

·

In cases in which only one dimension is given, left and right are symmetrical.


·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Roof Panel Corner -
B, b Hood Hinge Installation Nut M8 (0.31)
C, c Front Door Hinge Installation Nut M8 (0.31)
D, d Front Door Hinge Installation Nut M8 (0.31)
E, e Front Body Pillar Assembly Mark -
F, f Front Body Pillar Assembly Mark -
G, g Front Body Pillar Assembly Mark -
H, h Rocker Panel Assembly Mark -
J, j Rocker Panel Assembly Mark -
K, k Roof Side Rail Assembly Mark -
L, l Center Body Pillar Assembly Mark -
M, m Center Body Pillar Assembly Mark -
N, n Front Door Lock Striker Installation Nut M8 (0.31)
O, o Front Floor Cross Member Standard hole φ14 (0.55)
P Hand Brake Installation Nut M8 (0.31)

K139438E01
0.406,5.688 3.344,5.927 2.938,0.24 10 false Distance between points other than those above 0.094,8.458 0.406,8.656 0.313,0.198 10 false mm 0.104,8.615 0.375,8.854 0.271,0.24 10 false (in.)

K139439E01
0.365,7.615 3.333,7.885 2.969,0.271 10 false Distance between points other than those above 0.073,8.458 0.385,8.656 0.313,0.198 10 false mm 0.073,8.615 0.375,8.865 0.302,0.25 10 false (in.)