Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT REFERENCE VALUES › 2012.03–2016.06
BM2090E _01 Vehicle Exterior _060721 BODY DIMENSIONS _0297872 ENGINE COMPARTMENT REFERENCE VALUES F

BODY DIMENSIONS  ENGINE COMPARTMENT REFERENCE VALUES  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Measure points with the engine cover removed.

·

In cases in which only one dimension is given, left and right are symmetrical.


·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Bumper Side Support Installation Bolt M6 (0.24)
B, b Headlight Installation Bolt M6 (0.24)
C, c Front Fender Installation Bolt M6 (0.24)
D, d Front Fender Installation Bolt M6 (0.24)
E, e Front Fender Apron Patch Installation Bolt M6 (0.24)

K139450E01
0.5,7.635 3.479,7.906 2.979,0.271 10 false Distance between points other than those above 0.135,8.458 0.448,8.656 0.313,0.198 10 false mm 0.146,8.615 0.5,8.865 0.354,0.25 10 false (in.)