Home › Vehicle Exterior › BODY DIMENSIONS › UNDER BODY REFERENCE VALUES › from 2016.06
BM2090E _01 Vehicle Exterior _060721 BODY DIMENSIONS _0297873 UNDER BODY REFERENCE VALUES F

BODY DIMENSIONS  UNDER BODY REFERENCE VALUES  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Measure points with the engine under cover removed.

·

In cases in which only one dimension is given, left and right are symmetrical.


·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Arm Plate Installation Bolt M14 (0.55)
B, b Sub Frame Installation Bolt M10 (0.39)
C, c Sub Frame Installation Bolt M10 (0.39)
D, d Front Side Member Standard Hole φ18 (0.71)

K139453E01
2.156,7.031 5.167,7.302 3.01,0.271 10 false Distance between points other than those above 0.208,8.438 0.521,8.635 0.313,0.198 10 false mm 0.219,8.604 0.573,8.865 0.354,0.26 10 false (in.)