Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL ANTI-RUST AGENT MATERIAL › 2012.03–2016.06
BM2090E _01 Vehicle Exterior _060722 PAINTING / COATING _0297876 BODY PANEL ANTI-RUST AGENT MATERIAL F

PAINTING / COATING  BODY PANEL ANTI-RUST AGENT MATERIAL  APPLICATION AREAS  


1.

Apply anti-rust agent (wax) to the doors and hood edges (tips of outer panel folded parts) and undersides, areas around hinges, etc., to prevent rust. Coat the undersides of the edges using a nozzle and air gun, and coat the areas around the hinges using a brush.

HINT:

If anti-rust agent (wax) is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the anti-rust agent (wax) immediately.



K139368

U147326E01
5.57,4.942 5.874,5.098 0.303,0.156 10 c - c 2.623,5.957 2.884,6.112 0.262,0.156 10 <4> 1.502,5.683 1.763,5.839 0.262,0.156 10 <4> 3.243,6.184 3.505,6.340 0.262,0.156 10 <5> 5.534,9.154 5.796,9.310 0.262,0.156 10 <4> 1.87,9.687 2.132,9.843 0.262,0.156 10 <5> 1.406,3.857 1.497,4.009 0.091,0.151 10 c 1.405,4.496 1.496,4.648 0.091,0.151 10 c