Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL SEALING › 2012.03–2016.06
BM2090E _01 Vehicle Exterior _060722 PAINTING / COATING _0297879 BODY PANEL SEALING F

PAINTING / COATING  BODY PANEL SEALING  APPLICATION AREAS  


1.

Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

HINT:
·

Apply degreasing agent to a clean cloth and clean the sealer application areas.

·

After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.

·

If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.




K110022

Flat Finishing
K110023

No Flat Finishing

K105237

K104839

K104840

U147310E01
3.694,2.666 3.998,2.822 0.303,0.156 10 a - a 2.463,0.705 2.559,0.847 0.096,0.142 10 a 3.08,0.902 3.175,1.044 0.096,0.142 10 a

K104842

K106314

K106316E01
1.113,6.9 1.483,7.256 0.370,0.357 12 RH: 1.113,4.183 1.496,4.535 0.383,0.352 12 LH:

K104844

K104845