Home › Engine / Hybrid System › FA20 EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM2090E _51 Engine / Hybrid System _060622 FA20 EMISSION CONTROL _0297317 EMISSION CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

FA20 EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

Exhaust Emission Control System

i.

Three-Way Catalytic converters (TWCs) are used to reduce emissions in the exhaust gas.


ii.

Based on the signals from the wide range air fuel ratio sensor and oxygen sensor, the ECM controls the fuel injection volume in order to optimize the emissions in the exhaust gas.



b.

Evaporative Emission Control System

i.

The evaporative emission control system prevents the fuel vapors created in the fuel tank from being released directly into the atmosphere. This system has the following controls:

·

Purge flow control

·

Refueling vapor recovery

·

Evaporative emission (EVAP) leak check



ii.

Except on the models for Korea, the ECM controls the purge flow of evaporative emissions (HC) in the charcoal canister assembly in accordance with engine conditions.