Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MONITOR SYSTEM › from 2019.03
NM2090E _56 Audio / Visual / Telematics _081636 PARK ASSIST / MONITORING _0394959 MONITOR SYSTEM UN GENERAL/CONTROL/DETAILS F

PARK ASSIST / MONITORING  MONITOR SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

To assist the driver in parking the vehicle by monitoring the area behind it, the rear view monitor system has a rear television camera assembly mounted on the luggage door.


b.

A view of the area behind the vehicle will be displayed on the inner rear view mirror assembly.


c.

When the shift lever is in R and the ignition switch is ON, the rear view monitor system displays an image of the area behind the vehicle on the inner rear view mirror assembly, via the rear television camera assembly.


d.

The rear view display is canceled when the shift lever is moved to a position other than R.



PRECAUTION


a.

General Precautions

i.

Do not rely entirely on the rear view monitor system. Use caution, just as you would when backing up any vehicle.


ii.

Never back up while looking only at the screen. The image on the screen may differ from actual conditions. If you back up while looking only at the screen, you may hit an object or have an accident. When backing up, be sure to check by looking behind and all around the vehicle, both directly and using the mirrors, before reversing.



b.

Rear Television Camera Precautions

i.

The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.


ii.

In the following cases, it may become difficult to see the images on the screen, but this is not a malfunction:

·

In the dark (for example, at night).

·

When the temperature near the lens is very high or low.

·

When water droplets are adhering to the camera, or when humidity is high (for example, when it rains).

·

When the camera has scratches or dirt on it.

·

When foreign matter (for example, mud) is adhering to the camera lens.

·

When the sun or the beam of headlights is shining directly into the camera lens.



iii.

When the camera is used under fluorescent lights, sodium lights, or mercury lights etc., the lights and the illuminated area may appear to flicker.


iv.

When washing the vehicle with a high-pressure washer, do not spray water on the rear television camera assembly or surrounding area. High-pressure water can damage the camera.



c.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (LOCK)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)