Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › THROTTLE BODY
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297473 THROTTLE BODY G

FA20 ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY

a.
A280262E02
0.198,0.167 0.354,0.344 0.156,0.177 10 false *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Throttle with Motor Body Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle with motor body assembly.