If the ECM or ECM bracket needs to be removed, replace the ECM bracket with a new one.
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
55317A
2.REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)
55317A
3.REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)
55550
4.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
85900
5.REMOVE CONTROL UNIT RELAY ASSEMBLY (w/o Entry and Start System)
89661
6.REMOVE ECM
Disconnect the 4 connectors from the ECM.
Remove the 2 nuts and the ECM.
If a component has been dropped or subjected to a strong impact, replace it.
89667
7.REMOVE ECM BRACKET
Disengage the 2 claws, and remove the ECM bracket.