Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297475 ACCELERATOR PEDAL G

FA20 ENGINE CONTROL  ACCELERATOR PEDAL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 78110K 1.INSPECT ACCELERATOR PEDAL ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Data List / Accel Sensor Out No. 1 and Accel Sensor Out No. 2.


e.

Read the value displayed on the GTS.

Standard Voltage:
Accelerator Pedal Operation Accel Sensor Out No. 1 Accel Sensor Out No. 2
Released 0.213 to 4.772 V 0.213 to 4.772 V
Depressed 0.213 to 4.772 V 0.213 to 4.772 V